The thickness of the AD400 door leaf is 47mm with an approximate leaf weight of 35kg/m2.

Wall Types

Door sets must be installed carefully with particular attention to the sealing of gaps, including around the frame to wall junction.

Leaf Facings

The facings listed below are available for the AD400 door set

·         MDF

·         Timber Veneer

·         HPL decorative laminate (e.g. Formica)

·         Sheet Vinyl

Notes:

1.    Of the above facings only those marked * may extend around the door edge.

2.    Other facings may be available, please contact Pacific Doors to discuss further options.

Hardware

The AD400 requires suitable latching in order for the frame seals to fully seal the gap between door leaf and frame.

Practically any standard door hardware can be used on the AD400, however the proposed hardware must be advised to Pacific Door Systems Ltd to assess the suitability, before manufacture.

Any penetrations through the leaf should be packed with acoustic materials (e.g. batts) wherever possible.

Concealed hinges are not an option on this doorset.

 Recommended latching points are shown in the below diagram. Pair doorsets require a designated inactive leaf which is secured top and bottom.

Smoke control

AD-series acoustic doors are available with a smoke control rating (-/-/-/ SM). These doors comply with the NZBC C/AS2 C6.1.2 definition of smoke control doors.

Thermal insulation

This door leaf has a thermal insulation rating (R-value) of 0.739 Km2/W.