You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Masons Masonry Sealer

Masons Masonry Sealer is a penetrating sealer formulated for use on all mineral based — interior and exterior — wall and floor finishing products.

This includes concrete walls, floors and driveways, plaster and mortar finishes, stone and marble, absorbent tiles and fibre cement boards.

Key Features


  • Does not alter the colour or visual appearance of the treated surface
  • The water repelling properties facilitate ease of cleaning, hindering liquid stain penetration and induces the materials non-slip properties
  • Non-yellowing and UV resistant
  • Allows concrete to breath
  • Suitable for vehicle traffic
NZ-Owned Business
NZ-Owned Business
Scope of Use
  • Masons Masonry Sealer, is supplied ready for use and can be applied by brush or roller
  • It may also be applied by low pressure spraying, but care must be taken to minimise flooding and runs
  • Coverage rate is 10-12 square metres of surface per litre and two coats wet on wet are recommended for best performance


Limitations on Use

Has a solvent odour when curing. Although Masons Masonry Sealer, starts to act as soon as the treated surface is dry, it takes 24 hours to gain maximum properties.

Data Sheet

Since being established in 1999, Masons has become a key supplier in the New Zealand building industry, offering a variety of quality products and tools for a whole range of building requirements.

Product Enquiries

News from Masons

Scheduling Construction Made Easier with UNI PLUS Flexible Air Barrier
From Weather-Resistive Rigid Air Barrier Systems to Fire and Acoustic Rated Intertenancy Wall Systems
Acoustic and Fire Rated Intertenancy Walls That Go Up Easily
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.