You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
Salice Pacta Falling Flap Door System
Description

Salice’s Pacta is a compact falling flap door system suitable for use throughout the home in projects such as kitchen appliance ‘garages’, fold down work surfaces in laundries, table extensions, home offices, kids’ study desks, furniture and cabinetry. Designed and made in Italy, Pacta is simple and elegant and requires no additional stays or cables. Standard and push-to-open compatible models are available.

Key Features
  • Compact hinge for falling flaps
  • Italian design and manufacture
  • Simple and elegant; no additional stays or cables required
  • Decelerated opening action for gradual, controlled fall of door
  • Door and base panel fully aligned in open position for a flat, uniform surface
  • Available in Classic White and Satin Metal Black
  • Supplied as a paired kit containing 2 hinges, 2 mounting plates, 2 covers, fixing screws and Smove.
  • Extra central support hinge also available to supplement pairs for heavy/wide (over 900mm) doors (includes hinge, cover, fixing screws)
  • Push To Open-compatible models require Salice Magnetic Push to Open System to operate, consisting of SAL267 release device plus applicable retaining catch (either SAL268 or SAL269) and potentially an optional holder (SAL270 or SAL271)

Tech Info

  • Standard drilling of a door Ø 35mm
  • 13mm deep cup
  • 90° opening
  • Fixed K = 4.5mm

Adjustments:

  • depth -0.5mm to +2.8mm  
  • sideways -1.5mm to +1.5mm
  • height -1.5mm to +1.5mm
Scope of Use

Salice’s Pacta falling flap door system is suitable for residential use throughout the home; kitchens, sculleries, laundries, home offices, kids’ study desks, furniture and cabinetry.

See PDF for details of door weight limits, which are related to door size (height and width). As an approximate guide to calculating door weight, for 16mm board allow 11.84kg/m² and for 18mm board allow 13.32kg/m²

Tech Info

  • Standard drilling of a door Ø 35mm
  • 13mm deep cup
  • 90° opening
  • Fixed K = 4.5mm

Adjustments:

  • depth -0.5mm to +2.8mm  
  • sideways -1.5mm to +1.5mm
  • height -1.5mm to +1.5mm
Limitations on Use
  • Suitable for residential use, taking into account door weight limits.
  • For details of door weight limits, which are related to door size (height and width), refer to the information PDF.
  • As an approximate guide to calculating door weight, for 16mm board allow 11.84kg/m² and for 18mm board allow 13.32kg/m²
  • Refer to the Care & Maintenance document for further detail.
In-Service History

FIT first brought the Salice Pacta falling flap hinge system to the market in October 2018. Push to open functionality was added two months later.

Other Performance Attributes

Warranty

FIT warrants the original purchaser of products against manufacturing defects for as long as the original purchaser owns the product. This warranty applies to all non-electrical products sold by FIT in New Zealand and Australia.

The warranty covers replacements for faulty goods only. Replacements will be supplied to the original purchaser only. If the identical item is no longer available, FIT will replace with the closest item from their current product selection. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. The warranty does not apply if products have been incorrectly installed, have been subjected to loads in excess of specifications and/or have been subjected to uses/purposes for which they are not expressly intended. FIT’s liability is limited to the goods themselves and does not cover any consequential or incidental damages contributed to or resulting from the use, installation, performance or failure of products.

In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).

Documents
Product Guide: Salice Pacta Falling Flap Door System
Care & Maintenance: Salice Pacta Falling Flap Hinge

2024

FIT Warranty

2024

FIT are a Kiwi-owned and operated family firm creating and distributing innovative products for kitchen and home storage solutions.

Product Enquiries

News from FIT

Optimise Space in the Kitchen with New Slimline Steel Range of Storage Pull Outs NEW
Maximise Space in Kitchens, Laundries and Home Offices with the Cinetto Bifold Door
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.