
You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
5,321 products with technical literature, drawings and more from leading suppliers of NZ architectural materials.
Case studies, new products and product news from leading suppliers of NZ architectural materials.
Blogs for architectural specifiers, offering product, design and business advice.
Dulux Aquanamel Low sheen is a water-based interior acrylic enamel that dries to an ultra-smooth and tough finish.
Dulux Aquanamel Low Sheen can be used in many of the areas that traditional solvent based enamels are used, with all the time saving benefits of an acrylic paint. It is highly recommended for walls, doors, architraves, timber trim, and skirting boards as an alternative to enamels and is ideal for bathrooms, kitchens, and laundries.
Dulux Aquanamel Low Sheen is non-yellowing and resists chipping.
Dulux Aquanamel Low Sheen can be applied on properly prepared and primed / undercoated paper faced wallboard, cement bricks, set plaster, fibrous plaster, bare timber and previously painted surfaces, or where a durable mark and moisture resistant finish is required.
Do not apply paint if the temperature is below 10°C or likely to fall below 10°C during the drying period. Do not apply paint if Relative Humidity is above 85% or temperature is within 3°C of Dew Point. Do not apply if the surface temperature is greater than 40°C or below 10°C, or likely to fall below 10°C during the application or drying period. Avoid exposure to steam and condensation for at least 72 hours after application. Although the film is dry to touch in 30 minutes allow 7 days for film to fully cure before washing.
For 85 years Dulux has helped protect, maintain and enhance the spaces and places where Kiwis live, work and play, creating better homes and improving infrastructure across New Zealand.
Product EnquiriesNew and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.