BITUTHENE® 3000 is a self-adhesive, rubberised asphalt/polyethylene waterproofing membranes, combining a robust, flexible, pre-formed high performance, cross laminated, HDPE carrier film with a tacky, self-adhesive rubberised asphalt compound specifically designed to adhere to cured concrete surfaces.

Bituthene 3000 has been developed for positive long-term, low maintenance waterproofing of construction features such as:

• Foundations
• Basements
• Lift shafts and pits
• Underslab
• Elevated or grade level podiums

Not suitable for:

• Bituthene 3000 should not be applied when temperature is below +10° without consultation with the Nuralite representative
• Must be stored in a dry place protected from rain, sun, heat and cold temperatures
• Sun exposure of the product may difficult the removal of the polyethylene non-stick film. In service, maximum temperature should be below 50°C
• Bituthene 3000 should be kept exposed to the sun for the minimum possible time in order to prevent from UV rays damage. It is recommended to cover Bituthene 3000 within a few hours after application.

• Clause B2 DURABILITY: Performance B2.3.1 (a) not less than 50 years. 
• Clause E2 EXTERNAL MOISTURE: Performance E2.3.3. 
• Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1.