You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
Raftwood Engineered European Oak Flooring
Description

Supplied for interior flooring, Raftwood is a pre-finished engineered oak flooring, with tongue-and-groove profile. Raftwood is 15mm engineered with a 3mm oak top layer that varies up to 4mm with natural undulations and splits. It is heavily rustic: open splits and hand-filled knots, an oiled surface, and strong board-to-board colour movement.

Raftwood comes in a variety of profiles (wide planks, herringbone and chevron) but is typically ordered as a 220mm wide plank, 2200mm long depending on availability. Raftwood is available in eight colours, from pale and natural through to black.

Vienna Woods is the New Zealand representative for Raftwood, which is made by Dutch oak brand Flamingo.

Key Features
  • Eight colours, from pale and natural through to black
  • Combine with matching Herringbone and Chevron options
  • Greater dimensional stability than solid timber, responds better to changes in humidity
  • Natural oil finish, laid glue-down.
  • Milled to order
  • Vienna Woods has a network of trusted installers and provides specification support for architects and specifiers
Scope of Use
  • Interior flooring in residential and commercial applications
  • Suitable for use in Access Routes: D1.3.3(d)
  • Can be used in kitchens, laundries, and powder rooms — contact Vienna Woods for specification advice and support
  • Suitable for use with underfloor heating up to 27°C
Limitations on Use
  • Not suitable for permanent wet areas (bathrooms containing a shower or bath, saunas), garages, commercial kitchens, or any exterior application.
  • Excess moisture may cause cupping, swelling or delamination.
  • Incorrect subfloor preparation may compromise performance.
  • Colour change from UV exposure is normal in timber; mitigate with blinds or UV-filtering glazing.
  • Vienna Woods has a network of trusted installers and provides specification support for architects and specifiers
Statement of Building Code Compliance

Installed and maintained in accordance with Vienna Woods' requirements, this product will assist with meeting the performance clauses below.

  • Durability: B2.3.1(b) — Supplied with a 20-year residential / 5-year commercial structural warranty
  • Protection from Fire: C3.4(b) — see BPIR for full information
  • Access Routes: D1.3.3(d) — Level interior surfaces: NZBC D1/AS1 Table 2
  • Internal Moisture: E3.3.3 — Proposed as an Alternative Solution, supported by New Zealand testing to ISO 4760:2022(E) for topical moisture resistance and by installation to the Vienna Woods wet-area detail. 
  • Hazardous Building Materials: F2.3.1
  • Airborne and impact Sound: G6: Alternative Solution
Other Performance Attributes
  • Made by a mill that holds a PEFC Chain of Custody certificate

Warranty & Maintenance:

  • 20-year residential / 5-year commercial structural warranty.
  • Use Vienna Woods-approved cleaning and maintenance products for the finish supplied.
  • Maintain relative humidity between 40–60% where practical.
  • Improper maintenance may affect durability.
Documents
BPIR Product Statement: Vienna Woods Engineered Oak Flooring

2026 v.3.3

Technical Resources
PEFC Chain of Custody: Flamingo Raftwood
E3 Alternative Solution: Flamingo Raftwood

2026 v.3.1

Specification Support
Installation Guide: Engineered Timber, Glue-Down

2026 v.2.4

Use with Underfloor Heating
Care Guide: Lacquered Floors

2026 v.2.3

Care Guide: Oiled Floors
Vienna Woods Warranty

2026 v.3.0

Colours and Product Information: Raftwood
Styles, Finishes and Textures

Timber flooring is the only thing Vienna Woods does, sourcing a variety of profiles and finishes from manufacturers across the globe for architects, trade and resellers across New Zealand.

Product Enquiries
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.