You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
The VENT Circular Soffit Vent (G700) Vents can be utilised for new build and refurbishment projects. The G700s are an easy retro fit solution for existing soffits on both skillion and trussed roof designs with condensation problems.
Standard fixing for this product is a simple push twist action into a 70mm hole drilled in the soffit board. The G700 are designed with 4mm evenly spaced openings specifically sized to prohibit large insects gaining access but wide enough to prevent capillary action.
This product should be used in conjunction with the VENT Eaves Vent (EV25) or VENT Roll Rafter Tray (G502) to ensure ;continuous airflow into the roof void.
The G700 comes in white, black or brown colours.
Suitable for use in new and existing buildings within the following scope:
Whilst the G700 is predominantly used on residential it can easily be used on commercial buildings where buildings show signs of condensation and air quality problems.
The G700 is a method of ventilating the eaves/soffit area of a roof only and should be used in conjunction with the VENT Eaves Vent (EV25) or VENT Roll Rafter Tray (G502) to ensure ;continuous airflow into the roof void.
Vent Passive Roof Ventilation Products comply with the following provisions of the NZ Building Code:
All products are manufactured by Manthorpe Building Products Ltd (UK) who are ISO 9001 accredited by SGS Certificate # GB12/84769, certified since 2011.
The G700 Circular Soffit Vent has been designed to meet the requirements of BS5250, Control of Condensation in Buildings and has been in continuous manufacture and supply to the USA, Canada and UK building industry for over 20 years.
VENT provide complete passive ventilation systems that ensure healthy homes free from internal moisture and condensation.Product Enquiries
New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.