You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Profix TSEQ
Description

Decortech has developed the  Profix System for Trespa panels to meet seismic demands. The TSEQ Profix System is a multi-level commercial system has been developed specifically for the New Zealand market.

Profix TSEQ has been independently tested to AS/NZS 4284, complies with the relevant clauses of NZBC B1/B2 and E2/VM1 and meets requirements of NZS 1170 proven by testing to AS/NZS 4284. Profix TSEQ is mounted on a structural rail that has the capability to span between nogs, with the addition of support brackets adding to design flexibility.

  • Available in 4 master sheet sizes
  • Available in 8 and 10mm thickness
  • Available in a large range of colours and finishes
Key Features
  • The Profix TS-EQ system when specified within scope is designed to move and return to its original condition with its weather ability intact
  • The Profix TS-EQ rail system is durable, lightweight and can span between fixings allowing the rail to be packed straight and true. Standoff brackets can effectively straighten the structure whilst also offering a design friendly deeper cavity
  • Profix TS-EQ offers minimal maintenance and exceptional through life performance
  • All fixings are concealed
  • Exposed mechanical fixings (wafer head coloured 304 stainless steel screws or coloured structural rivets) can be used
  • Suitable for use as a cladding solution on new buildings and facade upgrades
  • Supply and installation is carried out by approved installers only

 

Scope of Use
  • Suitable for use as a multi-level commercial façade
  • Fixed over a Rigid Air Barrier compliant with NZBC E2/AS1/Table 23: 1 August 2011 and NZS 3604: 2011
  • Approved for use in wind zones up to 2.5 kPa ULS wind pressure or 64.5 m/s with reference to AS/NZS 4284. For use in wind zones exceeding 2.5 kPa wind pressure the system and fixings must be specified as site specific by the system suppliers
  • Suitable for use in all environments including sea spray and geothermal zones
  • Suitable for use with 10mm Trespa Meteon in panel sizes up to 3.0m x 1.2m horizontally and 2.5m x 1.2m vertically Note: The use of panel sizes exceeding those noted above must be specified as site specific by the system suppliers
  • Suitable for applications where a serviceability seismic displacement of up to +/- 20mm on an inter-story height of 4m or +/- 0.5% of floor height is required. (The ultimate racking test of the TS-EQ system was 56mm on a 4m floor. The same system achieved 87mm under further testing with no discernible damage to the panels or system)

 

Limitations on Use
  • Supply and installation is carried out by approved installers only
Statement of Building Code Compliance

Trespa Meteon panels in conjunction with Profix TSEQ Cladding system meet the requirements of NZBC sections B1 Structure, B2 Durability and E2 External Moisture. 

In-Service History

Trespa Meteon panels have been used extensively in Europe for over 50 years and in New Zealand for over 10

Other Performance Attributes

Trespa Meteon panels are:

  • Colourfast
  • Extremely durable
  • High impact resistance
  • Low maintenance
  • Graffiti resistant
Documents
Product Technical Statement
Environmental Information
FSC Certificate
ISO 14001 Certificate
ISO 9001 Certificate
PEFC Certificate
Additional Information

Décortech Exteriors: Elevating Exteriors through Innovative Cladding Systems

Product Enquiries

News from Décortech Exteriors

MondoClad: Non-Combustible Prefinished 3.0mm Solid Aluminium Panel NEW
Trespa Meteon Cladding Brings a Splash of Colour and Fun to Hillmorton High School
From High-End Homes to Vibrant Education Buildings with Trespa Meteon
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.