Resene Lusta-Glo by Resene

Resene Lusta-Glo

Description

Resene Lusta-Glo dries to a beautiful, even, silky semi-gloss finish. Based on a tough flexible alkyd resin to give fast drying and maximum durability in all hardwearing areas. This lower odour formulation is easy to apply and dries without the unwanted and strong solvent odours associated with traditional solventborne products.

Key Features

Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range.
Matches full gloss enamel in surface toughness, steam and scrub resistance.
Excellent intercoat and substrate adhesion.
Resene Lusta-Glo may be applied over Resene Acrylic Undercoat (see Data Sheet D404) or used as its own undercoat over an appropriately sealed surface.
May be applied over a wide range of temperatures.

Scope of Use

Architraves
Bathrooms
Furniture
Kitchens
Laundries
Plywood and wallboards
Skirtings
Timber doors
Window frames

Limitations on Use

Ensure the correct primer or sealer is used.
Use a matching colour undercoat when using tinted Resene Lusta-Glo. Resene Acrylic Undercoat (see Data Sheet D404) is available in colours suitable for use under Resene Total Colour System colours to facilitate perfect hiding and finish.
Due to waxes used in fibre and particle board, it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
Chalks more readily than Resene Super Gloss (see Data Sheet D32) on exterior exposure.
Drying may be affected by low temperatures and high humidity.
The final low gloss finish takes several days to develop.
May yellow in dark areas.