100% Polyester Carpark & Soffit Insulation Panels by Premier Insulation

100% Polyester Carpark & Soffit Insulation Panels

Description

100% Polyester Thermal Insulation is a high-density material consisting of thermally bonded polyester fibres. Designed for the thermal and acoustic insulation of masonry soffits and ceiling structures, panels are available in a range of R-values and thicknesses.

Backed by a 50 year warranty Premier Polyester Insulation is moisture, insect, and vermin resistant. It has been appraised by BRANZ and meets all relevant requirements of the New Zealand Building Code.

These products are manufactured in New Zealand using a minimum of 45% previously recycled fibre sourced from recycled PET. It is free of harmful toxins and chemicals and is designed to be gentle on skin, without causing any itching or irritation.

Format: Panels
Thicknesses: 70, 90, 140 & 165mm
Pack Configuration: 1200x2400mm
R-values range from R1.8 to R3.8

Key Features

50 year durability warranty
BRANZ appraised
Manufactured from 100% polyester fibres, using minimum 45% previously recycled fibre (PET plastics)
Moisture and vermin resistant
Non-toxic, non-allergenic, non irritant, soft and safe to touch
Made in NZ and designed for New Zealand buildings

Ranges

Premier 100% Polyester Thermal Insulation

NZ Made

Pre-Consumer Recycled Content

Scope of Use

100% Polyester Thermal Insulation provides thermal and acoustic insulation for masonry soffits and ceiling structures and can be used for steel portal commercial and industrial buildings.

Panels are available in:

Thicknesses: 70, 90, 140 & 165mm
Pack Configuration: 1200x2400mm
R-values range from R1.8 to R3.8

See Data Sheet and Installation Guide for full information.

Contact Premier Insulation for specification and H1 support.

Limitations on Use

Must be installed in accordance with Premier Insulations' installation guide and other literature
Premier Insulation should not be crushed, folded, or compressed

Statement of Building Code Compliance

Premier Polyester is designed for the thermal and acoustic insulation of buildings in accordance with the New Zealand Building Code (NZBC) H1 Energy Efficiency.

When installed in accordance with the manufacturer's instructions, Premier Polyester will meet or contribute to meeting the following NZBC clauses:

B2 Durability — B2.3.1 (a) — meets this clause will perform for a minimum of 50 years
E3 Internal Moisture — meets this clause
F2 Hazardous Buildings Materials — meets this clause
H1 Energy Efficiency H1.3.1(a) & H1.3.2.E — will support buildings to meet these clauses

Other Performance Attributes

50 year durability warranty
BRANZ certified — see Appraisal 1097
Manufactured from 100% polyester fibres, using minimum 45% previously recycled fibre (from post-consumer recycled PET plastics)
Moisture and vermin resistant
Non-toxic, non-allergenic, non irritant, soft and safe to touch