• Interior walls and ceilings
• Residential and commercial applications
• Use for joinery and cabinet fronts, cupboards, bedheads, and counterfronts
• Can be installed vertically or horizontally
• Can be fixed directly over existing plasterboard or attached to timber battens and timber or steel framing

• Not suitable for exterior applications or areas subject to continuous moisture
• Panels cannot be left raw; they must be finished with wax, oil, or polyurethane as recommended by coating manufacturers
• Cannot be fixed directly to masonry, brick, or blockwork; timber battens at 450mm centres are required for these surfaces
• These are decorative panels and must be supported by studs or battens at maximum 450mm centres

• Clause B2 DURABILITY: Performance B2.3.1 (c) 5 years for interior linings
• Clause C3 FIRE AFFECTING AREAS BEYOND THE FIRE SOURCE: Group 3 Standard
• Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1

Touchwood Veneer Panels have been used in various projects across Australia and New Zealand, including retail environments, hospitality venues, and private residences.

• PEFC Certified

Sustainably Sourced Hardwood & Carbon Sequestration

Sustainable timber is sourced from responsibly managed forests, where harvesting is done in a manner that ensures ongoing replenishment without causing harm to the surrounding environment, including native flora and fauna. LMA Timber do not source from tropical rainforests such as those in Indonesia and the Amazon.

Not only is hardwood more durable but is also far superior when it comes to carbon sequestration compared to most other timber options
available in New Zealand.