You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
Stecca® Aluminium Fin Balustrade System
Description

Stecca® is a striking balustrade system with front or top mounted fin slat and is available in two configurations; Continuous Aluminium or Post System, and is a contemporary option for modern designs where aluminium detailing is front, and centre of a building's look.

Key Features
  • Two configurations Continuous Aluminium (postless) or Post System
  • Continuous aluminium fin balusters that are face or top mounted to enable a postless finish
  • Post option — Slats fit the front of the support rails (rather than inside)
  • Infill: Front mounted 49mm wide aluminium fin slat
  • Aluminium caps for slat and post ends
  • Technical backup readily available
  • Powder coated in NZ using top quality Dulux colours
  • Quality assured — installed by qualified installers
  • 5 year warranty on balustrade
  • 15 - 25 year warranty on powder coating
  • Suitable for waterproof/floating decks
  • Custom made balustrade solution
  • Optional handrail
NZ Made
NZ Made
NZ-Owned Business
NZ-Owned Business
Scope of Use
  • Stecca® Balustrade is suitable for deck and balcony barriers, stairways and pool fencing
  • Occupancy Types A, A Other, B, C3 & E only. Occupancy Types as per AS/NZ 1170.1.2002
  • Suitable for fixing to timber, concrete, steel
  • Suitable for waterproof/floating decks
  • Custom made balustrade solution
  • Top mounted or face fixed options
  • Optional handrail
  • Complies with NZS1170, NZS4223.3.2016, NZBC Clause F9, and 162C of the Building Act, and NF P01-13 (1988-08) for pool safety
  • Domestic & Residential application
Limitations on Use
  • The Juralco Balustrade System manual details all extrusions and components used for the Juralco Stecca® fabrication and installation/fixing of the system
  • A Producer Statement 1(Design) is available. Copies of the above documents are available from: Juralco Aluminium Building Products Ltd 48 Bruce McLaren Rd, Henderson, Auckland Phone 09 478 8018 Fax 09 478 7883 Email [email protected]
  • Any deviation from the standard fabrication or installation/fixing must be accompanied by a site specific PS1 with site specific calculations and drawings
  • Only extrusions, components and hardware supplied by or specified by JABP may be used in the Juralco Stecca® System
  • Aluminium extrusions, components and hardware — unless specified are manufactured to 6060 T5 specifications
  • Stainless Steel components, hardware, fixings — all components to 316 grade
  • The Balustrade System must only be installed in accordance with the ® Juralco Stecca Balustrade System manual
  • Any deviation from that specified in the Juralco Stecca® manual must only be in accordance with site specific PS1 with site specific calculations and drawings listing the non standard details
  • The Juralco Stecca® Balustrade System must only be fabricated/installed by a Juralco approved fabricator
  • Upon completion of the installation the fabricator must supply the owner with a PS3 (Construction)
Statement of Building Code Compliance
  • The Juralco Stecca®  Balustrade System has been reviewed by Lautrec Technology Group Ltd to demonstrate compliance with the structural requirements of the New Zealand Building Code and AS/NZS 1170 : 2002 occupancy A, A Other, B, C3, and E, NZS 3604 Low, Medium, High, Very High and Extra High Wind Zones
  • The Structural Engineering design includes the requirements of B1 Structure, B2 Durability, F2 Hazardous material and F4 Safety from falling, all from the Building Code
  • Verification Method B1 / VM1, B2/AS1, F4 / AS1, F9/AS1. - Complies with NZS 4223.3.2016
In-Service History

Juralco has many decades of experience designing and installing balustrades throughout New Zealand and continues to focus on supporting and developing its dealer network.

Stecca® has been introduced to complement its existing balustrade systems and offer customers more options.

Other Performance Attributes
  • 5 year warranty on balustrade
  • 15 - 25 year warranty on powder coating
Documents
BPIR Stecca Fin

05-25v1

BPIR Stecca Post

10-24v1

Stecca Continuous Aluminium Fin Balustrade

07-26 v1

Stecca Post System (as part of Edge range)

10-24v1

Dulux Registered Powder Coating Applicator
Maintenance Instructions
Warranty

Dec 2022

Balustrades Brochure

2025

Stecca Flyer
CAD/PDF Details
Stecca Balustrade CAD File

7-26 v1

Juralco design and supply exceptional aluminium building products through the nationwide HomePlus network.

Product Enquiries

News from Juralco Aluminium

A Refined Solution for High-Performing Interior Openings: The 5200 Series Sliding System
New Advanced Set of BIM Objects for Operable Louvre Roof and Balustrade Systems Engineered for Performance in NZ Conditions
SunPivot: A Pivoting Louvre Roof System Supporting Flexible Architectural Design
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.