You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

CS MirrorLite Door

The CS MirrorLite is a pre-finished high quality double sided mirror door designed for residential or commercial use. This purpose designed door is manufactured to a high standard and uses all aluminium construction for stability.

The aluminium frame is covered in 4mm thick vinyl backed safety mirror and clashed on both vertical edges only with natural anodised aluminium clashing. The unique design of the CS MirrorLite allows the mirror to cover the entire face of the door to within 9mm of the front and rear edges. When fitted to a CS Cavity Slider, all clashings are hidden when the door is in the closed position, revealing a full length mirror.

Key Features
  • Supplied as a pre-finished door complete with recessed side handles and a front edge pull fitted to the leading edge
  • Suitable for use in cavity sliding, surface sliding or wardrobe applications
  • Pre-finished: manufactured in the factory to arrive on-site fully finished
  • Available in standard and non-standard sizes up to 2.4m high and 1.2m wide
  • Minimal clashing thickness gives the impression that the mirror covers the full face of the door (edge to edge)
  • CS MirrorLite doors are 39mm thick, which is ideal for use in CS Cavity Sliders
NZ Made
NZ Made
Scope of Use

CS MirrorLite door leaves are suitable for use in sliding applications in residential or commercial buildings.

  • Supplied as a pre-finished door complete with recessed side pulls and a Front Edge Pull fitted to the leading edge
  • CS MirrorLite doors are 39mm thick, which is ideal for use in CS Cavity Sliders
Limitations on Use
  • Maximum size: 2400mm high x 1200mm wide
  • Not suitable for pivot or pre-hung applications
Statement of Building Code Compliance

CS Cavity Sliders will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

  • Clause B1 Structure: Performance B1.3.1, B1.3.2 and B1.3.4. CS Cavity Sliders meet the requirements for loads arising from self-weight, earthquake, wind and impact [i.e. B1.3.3 [a], [f], [h] and [j]].
  • Clause B2 Durability: Performance B2.3.1 [a], not less than 50 years, [b], 15 years and [c], 5 years. CS Cavity Sliders meet these requirements.
  • Clause F2 Hazardous Building Materials: Performance F2.3.1. CS Cavity Sliders meet this requirement and will not present a health hazard to people.
In-Service History

CS Door Leaves have been successfully used in commercial and residential projects in New Zealand and Australia since 2001. 

Other Performance Attributes
  • CS Door Leaves manufactured by CS For Doors are backed by a 5 year written guarantee
BRANZ Appraised
BRANZ Appraised
Data Sheet
BRANZ Appraisal

900 [2020]

Maintenance Instructions
Additional Information

CS For Doors are a manufacturer of cavity sliding door systems and related products.

Product Enquiries

News from CS For Doors

CS AutoCav: A Touch-Free Cavity Slider Solution
Bracing Cavity Slider Used for Bracing Wall in Renovation
Stacking Cavity Sliders Enable Flexible Use of Space in Childcare Centres
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.