GreenStuf Skillion Roof Blanket by Autex

GreenStuf Skillion Roof Blanket

Description

GreenStuf Skillion Roof Blanket is 100% polyester thermal insulation blanket/rolls designed and manufactured to deliver higher R-Value performance in depth-restricted construction cavities such as skillion roof situations.

Key Features

Local & proud - proudly made in New Zealand
Durable - will not settle or reduce it's performance over time and is backed by a 50 Year Product Durability Warranty
Fire Safe - polyester insulation is non-flammable and meets all the relevant fire standards for NZBC compliance including downlights
High Performance - not affected by moisture, mould or mildew, and is naturally resistant to insect and vermin attack
Recycled content - manufactured using a minimum of 45% recycled PET Plastics, and also recyclable at the end of it's life
Can also be used in ceilings, mid-floor cavities and as a high performance underfloor insulation

Ranges

Autex GreenStuf Insulation

Green Tag Certified

Post-Consumer Recyclable Content

Pre-Consumer Recycled Content

NZ Made

NZ-Owned Business

Scope of Use

Autex Greenstuf has been appraised as thermal and acoustic insulating material in walls, roofs and ceilings of buildings within the following scope:

framed or part-framed domestic and commercial buildings where the insulation remains dry during its serviceable life.

Autex Greenstuf must be installed in accordance with the relevant requirements of NZS 4246, the Technical Literature and Appraisal No.380 (2008), to meet the stated thermal performance rating of the insulation.

Statement of Building Code Compliance

In the opinion of BRANZ, Autex Greenstuf if designed, used, installed and maintained in accordance with the statements and conditions of Appraisal No. 380 (2015), will meet or contribute to meeting the following provisions of the New Zealand Building Code:

Clause B2 DURABILITY: Performance B2.3.1(a), not less than 50 years, and B2.3.1(b) 15 years. Autex Greenstuf will meet this requirement.

Clause E3 INTERNAL MOISTURE: Performance E3.3.1. Autex Greenstuf will contribute to meeting this requirement.

Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1. Autex Greenstuf will not present a health hazard to people.

Clause H1 ENERGY EFFICIENCY: Performance H1.3.1 (a), H1.3.2 (E). Autex Greenstuf will contribute to meeting this requirement.

Autex Greenstuf has been appraised as an Acceptable Solution in terms of New Zealand Building Code Compliance. Autex Greenstuf thermal resistance (R-Value) has been determined by AS/NZS 4859.1 which is an acceptable method.