You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
5,265 products with technical literature, drawings and more from leading suppliers of NZ architectural materials.
Case studies, new products and product news from leading suppliers of NZ architectural materials.
Blogs for architectural specifiers, offering product, design and business advice.
GreenStuf® Thermal Wall Blanket is designed for the thermal insulation of timber-framed buildings. Thermal Wall Blanket is manufactured to order and pre-cut to nominated width for walls. GreenStuf wall products are available in a range of performance options for both 90mm, 140mm, and 210mm framing.
GreenStuf Thermal Wall Insulation are designed for the Thermal Wall Insulation of timber framed buildings in accordance with New Zealand Building Code (NZBC) H1 Energy Efficiency requirements. GreenStuf Thermal Pads can be used in ceilings, internal and external walls and mid-floor cavities.
R-Value | Thickness | Width | Form | Nominal GSM | Nominal Density (kg/m³) |
Thermal Conductivity (W/mK) |
---|---|---|---|---|---|---|
R2.6 | 140mm | 580mm | Roll | 1650 | 11.3 | 0.051 |
R2.9 | 140mm | 580mm | Roll | 1850 | 13.2 | 0.048 |
R3.4 | 140mm | 580mm | Roll | 2550 | 18.2 | 0.041 |
To ensure Building Code compliance, architects and building designers are advised to consult an engineer or the relevant NZ standards before specifying thermal and acoustic insulation products. For information and assistance please contact a GreenStuf account manager.
NZBC Compliance: When installed in accordance with the manufacturer's instructions, GreenStuf insulation will satisfy the 50 year durability clause NZBC B2.3.1 (a). GreenStuf meets the relevant clauses of NZBC E3 Internal Moisture, F2 Hazardous Building Materials, and will contribute to meeting H1 Energy Efficiency.
H1 Energy Efficiency: This product will contribute to a building meeting building code Clause H1. All GreenStuf thermal insulation is created to meet with MBIE's new changes.
Fire Regulations: GreenStuf insulation may not be suitable for all applications, as stipulated in the NZBC. Please consult a fire engineer when specifying GreenStuf insulation or contact your GreenStuf account manager for further information.
Acoustic Performance: GreenStuf insulation will assist sound reduction by reducing the resonating noise inside the construction cavity. Typical improvement in sound transmission loss through walls with the use of GreenStuf R2.0 Wall insulation is an increase of 5-6 STC points.
Hazardous Building Materials: GreenStuf is non-hazardous.
Durability: GreenStuf has a 50 Year Durability Warranty.
Moisture: GreenStuf is not affected by moisture. Exposure to an atmosphere of 50°C at 90% relative humidity for four days showed moisture absorption by weight of less than 0.03%.
GreenStuf thermal and acoustic insulation is made from 100% polyester fibre, with a focus on zero waste and recyclability, it contributes to improved air quality, and is safe to touch.
Product EnquiriesNew and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.