Available from facade specialists, Paneltec, Induracore G2 is a three layer aluminium laminated panel (ALP) cladding system that combines lightweight, non-combustibility and durability with the design flexibility needed to create eye-catching exterior facades.
Applications
Induracore G2 is suitable for exterior cladding for a broad range of projects, and is specifically manufactured for buildings over 3 storeys such as office blocks, hotels, apartment buildings, to high-rise commercial buildings.
It is particularly suited for buildings above ten metres where other aluminium cladding options may not meet fire requirements. The non-combustible nature of the aluminium core makes it suitable for buildings up to twenty-five storeys, or can go to an unlimited height with building specific engineering, while the excellent design flexibility gives designers the options they need to add interest to large facades.
The panels are also suitable as an internal wall lining, with their non-combustibility providing a key advantage.
Key performance benefits
Fully compliant — backed by independent testing
The unique three-layer build-up of Induracore G2 features a stamped profiled aluminium core which ensures greater fire performance over traditional aluminium composite claddings. This results in a fully compliant panel, with performance backed by full-scale full wall build-up fire testing (BS8414 fire test) conducted by a third party.
As a fully compliant aluminium façade system, Induracore G2 ensures greater design flexibility over fire-rated ACM systems. The system can be used on any height building, and use is not restricted by boundary limits.
Lightweight — only 4.6kg/m²
Induracore G2 is very lightweight at just 4.6kg/m², compared to approximately 7.3kg/m² for a standard ACM panel. This can reduce the weight of the facade overall, while making for a simpler and more efficient install process, with easier handling contributing to a faster overall install.
Durable laminated panels that reduce the risk of oil canning
The laminated three-layer build-up of Induracore G2 panels makes them extremely rigid and durable. They are 5x more rigid and 70% less likely to oil can than solid aluminium. This ensures facade panels stay looking flat and level over time — just as they were designed.
Exceptional design flexibility
Designers can take advantage of the versatility of Induracore G2 to bring unique design concepts to life. Panels can be cut, shaped and formed to meet the requirements of a wide variety of architectural designs, and are available in a large range of colours to suit any project. Where a unique colour is required, Paneltec can match Induracore G2 panels to virtually any colour or finish to achieve the desired design aesthetic.
Design support
The Paneltec team is passionate about working with architects to find the right solution for each building, and supports each project from concept through to completion. By getting Paneltec involved in the early stages, their team can provide insights on feasibility, project-specific advice and design support.
Their internal design team can provide feedback on details to help the architect achieve the best outcome. Their team also provides shop drawings, and can also engage facade engineers who are familiar with Paneltec’s cladding systems. This level of detail and support helps simplify the consenting process, so that when the project gets to council, fewer RFIs come back.
History of use
Paneltec brought Induracore G2 to the NZ market to meet demand for a fully compliant aluminium cladding system. Developed by Fairview Australia, the system has been in the Australian market since 2010.
Since introduction to New Zealand, Induracore G2 has been used on a range of notable commercial projects to achieve unique facade designs, including Union Square in Hamilton, Forsyth Barr House in Dunedin, Westlight Apartments in Auckland, and Latitude Apartments in Tauranga. The system has also been used by Scentre Group as a durable non-combustible interior wall lining in Westfield malls.
Warranty & maintenance
Induracore G2 Panels are low maintenance and are backed by a fifteen year warranty. Specific maintenance requirements, such as frequency of washing, vary depending on location and exposure of each unique building, with Paneltec confirming maintenance needs as part of the project-specific warranty.
Environmental performance
Induracore G2 is backed by an EPD from Global Greentag, which gives designers independently verified information on the lifecycle impact of the system. This ensures greater environmental transparency and makes it easier to specify in projects targeting a sustainability certification such as Green Star.
Learn more
Paneltec are the NZ distributor of Induracore G2 and their team is passionate about helping architects achieve their unique design visions.
Get in touch with Paneltec’s technical team to learn more.
















