You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Gazco Studio 2 Open & Glass Fronted Gas Fires & Fireplaces
Description

Gazco's Studio 2 Gas Fires are available in Open Fronted or Glass Fronted designs with either conventional or balanced flue options. Open Fronted Studio fires feature a contemporary ribbon of flames on a bed of white stones, which can be upgraded to black glass beads. Echoing the fire's clean form, these minimalist fuel effects create a designer statement that can be appreciated with or without the flames.

With a wealth of design options complemented by a choice of linings, frames and fuel bed effects, these contemporary gas fires will add instant style and presence to any modern interior.

Please Note: The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used.

Key Features

Gazco Studio 2 Balanced Flue Gas Fire

  • Efficiency: 81% Heat output: 6.90kW
  • Natural Gas or LPG
  • Programmable Thermostatic Remote
  • Optional frames
  • Optional lining
  • Optional Warm Air Ducting Kit — to maximise the heat from the appliance the optional warm air ducting kit is available to transfer warm air to adjacent rooms
  • Balanced Flue Convected Warm Airflow — Balanced flue models heat the room with convected warm air via the chimney breast or enclosure into which the appliance is installed. The void around the fire must be ventilated at both low and high levels on both sides to prevent heat build up. These vents take cold air from the room and return it back into the room. Care must be taken to comply with clearance to combustible materials as detailed in the instruction manual

Gazco Studio 2 Conventional Flue Gas Fire

  • Efficiency: 81% Heat output: 6.90kW
  • Natural Gas or LPG
  • Black Enamel lining
  • Optional frames
  • Optional lining
  • Optional Warm Air Ducting Kit

 

Scope of Use
  • Urban and rural use
  • LPG or Natural Gas only
  • Requires flueing
Limitations on Use

Balanced Flue Convected Warm Airflow — Balanced flue models heat the room with convected warm air via the chimney breast or enclosure into which the appliance is installed. The void around the fire must be ventilated at both low and high levels on both sides to prevent heat build up. These vents take cold air from the room and return it back into the room. Care must be taken to comply with clearance to combustible materials as detailed in the instruction manual

Other Performance Attributes
  • Efficiency: 81% Heat output: 6.90kW
Documents
CAD/PDF (link to page on supplier website)
Installation Instructions: Gas Fires
Brochure

After over 30 years' experience, customers can trust The Fireplace’s experience and range of products.

Product Enquiries

News from The Fireplace

Mesmerising, Modern and Minimalist Wood Fire
New to NZ: The Essential Fire by Stûv NEW
Essential Guide to Fireplaces
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.