You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

SET-XP High-Strength Epoxy Anchoring Adhesive
Description

SET-XP Epoxy Anchoring Adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system (dual cartridge) with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal colour for easy post-installation identification.

Key Features
  • Seismic rated as per ACI 355.4
  • High strength
  • Non-shrink, high solids
  • Long-term loading (creep) applications
  • Non-sag formulation: good for vertical applications
  • Suitable for over sized and core-drilled holes
  • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
  • Cure times: 24 hours at 21°C, 72 hours at 10°C
  • Easy hole-cleaning — no power-brushing required
  • Suitable for use in dry or water-saturated concrete
  • For best results, store between 7°C and 32°C
Scope of Use
  • Suitable for over sized and core-drilled holes
  • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
  • Cure times: 24 hours at 21°C, 72 hours at 10°C
  • Suitable for use in dry or water-saturated concrete
  • Design Capacities are available on the website 
  • For best results, store between 7°C and 32°C

Applications:

  • Rebar Dowelling
  • Tension Zones
  • Dry And Wet Concrete
  • Threaded Rod Anchoring
  • General Purpose Anchoring
  • Overhead Anchoring (Tension Zones)
  • Structural Steel
  • Seismic Retrofit
Statement of Building Code Compliance
  • BRANZ Appraisal No. 983 (2023)
  • Complies with AS5216
  • Seismic testing per ACI 355.4
  • ETA-11/ 0360 (OPTION 1)
  • ICC-ES ESR-2508 (Concrete)
  • IAPMO UES ER-265 (Masonry)
  • NSF/ANSI Standard 61 (313 cm2/ 1000 L)
  • Transport and Main Roads (QLD) product approval (Threaded rod and Reinforcing bar)
B1 Structure compliant
Structure
B2 Durability compliant
Durability
BRANZ Appraised
BRANZ Appraised
Independent Assessment
Independent Assessment
Test Results
Test Results
Documents
Material Safety Data Sheet
Technical Data Sheet
BRANZ Appraisal

983 [2023]

European Technical Assessment

ETA-11-0360

IAPMO UES Evaluation Report

ER-265

ICC-ES Evaluation Report
Product Approval

FL16230

Product Approval

FL17449

Full Catalogue: Anchoring and Fastening Systems

2018

Full Catalogue: Timber Connectors NZS3604

F-C-NZS3604-20

Technical Brochure

A leader in structural systems research, testing and innovation, Simpson Strong-Tie is among the world's largest suppliers of solutions and products, helping build safer, stronger structures.

Product Enquiries

News from Simpson Strong-Tie

Deck Structure Products: Making Deck Building Over Concrete Easier NEW
Developing High-Capacity Tension Straps for Mass Timber Engineering NEW
Quik Drive Screw Fixing Contributes to Acoustic Solutions
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.