Resene SpaceCote Low Sheen Kitchen & Bathroom by Resene

Resene SpaceCote Low Sheen Kitchen & Bathroom

Description

Resene SpaceCote Low Sheen Kitchen & Bathroom combines the benefits of a waterborne enamel with added anti-bacterial silver protection and MoulDefender. This breakthrough product may be used to bring enamel style toughness to broadwall areas, giving a low-sheen finish with added protection.

Key Features

Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range
Reduced side sheen minimises the appearance of minor surface defects
Very durable, abrasion-resistant finish that may be easily cleaned. Ideal for GIB ToughZone areas.
Protects against bacteria with silver and against mould with MoulDefender.
Non-yellowing
May be used wherever solvent borne enamels have traditionally been used.
Clean, spatter-free application
An Environmental Choice approved product

Scope of Use

Typical Uses: Bathrooms, kitchens, laundries, timber doors, trim and joinery, window frames.

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Ensure the correct primers and/or sealers are used.
Due to waxes used in particle and fibreboard it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
Although serviceable within 12-48 hours, full print and solvent resistance takes seven days to develop.

Consult the current Data Sheet and Safety Data Sheet prior to specification or application of product.