Resene SpaceCote Flat CoolColour by Resene

Resene SpaceCote Flat CoolColour

Description

Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.

Key Features

Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range.
Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure.
Flat finish minimises the appearance of minor surface defects.
Very durable, abrasion resistant finish that can be easily cleaned. Ideal for GIB ToughZone areas.
Non-yellowing.
May be used wherever solventborne enamels have traditionally been used.
Resene SpaceCote Flat may be applied over Resene Quick Dry (see Data Sheet D45) or directly over sound, clean old enamel surfaces.
Clean, spatter free application.
An Environmental Choice approved product.

Scope of Use

Typical uses
Block and brickwork
Concrete
Fibre cement
G.R.C. panels
Primed timber
Solid plaster

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Ensure the correct primers and/or sealers are used.
Due to waxes used in fibre and particle board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
Although serviceable within 12-48 hours, full print and solvent resistance takes 30 days to develop.

Documents

CAD/PDF (link to page on supplier website)

URL