Resene Imperite I.F. 503 by Resene

Resene Imperite I.F. 503

Description

Resene Imperite I.F. 503 is a high performance finish for use when an isocyanate-free topcoat is required. Two-component finish for a wide variety of suitably prepared substrates in all but the most demanding environments. Quick dry properties allow early handling of coated items. Available in solid and metallic pigmented colours.

Key Features

Colour: White, selected BS2660, BS5252 and Resene Total Colour System, The Range and Metallic Effects
Isocyanate free
When used as the finish over Resene Armourcote 220 (see Data Sheet RA34), same day turnaround of the total system can be achieved.
Exterior weathering properties are similar to a high quality pure acrylic topcoat.
Overcoat with Resene Uracryl 400 Series UVS clears for improved colour fastness (all metallic finishes), durability, and chemical resistance. Allow Resene Imperite I.F. 503 base colour to cure for a minimum of 48 hours with good ventilation before applying the Resene Uracryl 400 Series UVS clear.

Scope of Use

Aluminium
Concrete /plaster
Fibre cement
G.R.C. panels
GRP
Repaints
Stainless steel

Limitations on Use

In environments where maximum chemical and solvent resistance is required the use of two-component epoxies or polyurethanes is recommended.
Not recommended for prolonged immersion in fresh or saltwater or solvents.
Full cure may take up to seven days depending upon environmental conditions. In early stages or curing, film may be susceptible to mechanical damage.
Suitable for brush or roller application on small areas only.
Not recommended for direct application to Resene Vinyl Etch (see Data Sheet RA31), Resene Armourcote 210 (see Data Sheet RA35) or inorganic zinc rich primers.