Resene Enamacryl CoolColour by Resene

Resene Enamacryl CoolColour

Description

Resene Enamacryl CoolColour is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up.

Key Features

Colour: selected colours from the Resene Total Colour System
Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure
May be used wherever solventborne enamels have traditionally been used
Non-yellowing
Resene Enamacryl may be applied over Resene Quick Dry (see Data Sheet D45) or directly over sound, clean old enamel surfaces
Clean, spatter-free application
An Environmental Choice approved product

Scope of Use

Typical uses: window and door trim, panels and joinery.

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Ensure the correct primers and/or sealers are used.
Due to waxes used in particle and fibre board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat.

Consult the current Data Sheet and Safety Data Sheet prior to specification or application of product.

Documents

CAD/PDF (link to page on supplier website)

URL