You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
The Architectural Cavity Closer is a patented design that hides the unsightly slots commonly associated with a drained cavity finish above eye level. This means the aesthetics of the project aren't compromised, and saves the disproportionate amount of time spent of masking these areas.
The 20mm Cavity Closer is available in Graphite and Ivory to match cladding and soffit lining finishes.
Designed and manufactured in New Zealand for New Zealand conditions.
Dynex cavity closers can be used in conjunction with wall cladding systems on timber and steel framed buildings within the following scope:
The scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with regards to building height and floor plan area; and,
With cavity-based weatherboard, fibre cement sheet, External Insulation and Finishing Systems [EIFS], stucco and plywood wall cladding systems complying with NZBC Acceptable Solution E2/AS1 or with any proprietary cavity-based cladding system covered by a current BRANZ Appraisal or CodeMark Certification; and,
Situated in NZS 3604 Wind Zones up to, and including Extra High and specific design wind pressures up to and including design differential ultimate limit state (ULS) 2.5 kPa.
Dynex cavity closers have been designed for use in accordance with NZBC Acceptable Solution E2/AS1, Paragraph 126.96.36.199. Any use outside this scope must only be undertaken once approval has been sought and granted from the manufacturer in writing.
Any painting of the cavity closers must ensure that the ventilation openings are not covered or compromised in size.
Dynex Cavity closers meet the durability requirements of NZBC Clause B2, Performance B2.3.1 (b) 15 years and B2.3.2.
Dynex Cavity Closers are a range of extruded uPVC and polymer based flashings designed to meet the requirements of E2/AS1 and are made in New Zealand.
Dynex Cavity Closers are covered by BRANZ Appraisal No. 911 (2016).
Dynex deliver innovative, durable and attractive building solutions that make building and maintenance more cost-effective, while minimising any impact on the environment.Product Enquiries
New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.