You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

GreenStuf Masonry Wall Blanket
Description

GreenStuf Masonry Wall Blanket is 100% polyester thermal insulation blanket/roll designed for insulating strapped and lined concrete/masonry walls. GreenStuf Masonry Wall Blanket is pre-cut to fit standard timber strapping set at 600mm centres.

Key Features
  • Local — proudly made in New Zealand
  • Durable — will not settle or reduce it's performance over time and is backed by a 50 Year Product Durability Warranty
  • Fire Safe — polyester insulation is non-flammable and meets all the relevant fire standards for NZBC compliance including downlights
  • High Performance — not affected by moisture, mould or mildew, and is naturally resistant to insect and vermin attack
  • Safe to touch — 100% polyester, completely safe and does not require protective clothing for handling or install
  • Recycled content — manufactured using a minimum of 45% recycled PET Plastics, and also recyclable at the end of it's life
  • Breathe Easier — independently assessed by Asthma New Zealand and accepted into their Breathe Easy programme
  • Safer indoor air quality — does not contain any added chemicals such as formaldehyde based binders or fibres that can be breathed into lungs
Green Tag Certified
Green Tag Certified
Recyclable Content (Post-Consumer)
Post-Consumer Recyclable Content
Recycled Content (Pre-Consumer)
Pre-Consumer Recycled Content
NZ Made
NZ Made
NZ-Owned Business
NZ-Owned Business
Red List Material Free
Red List Material Free
Scope of Use

Autex Greenstuf has been appraised as thermal and acoustic insulating material in walls, roofs and ceilings of buildings within the following scope:

  • framed or part-framed domestic and commercial buildings where the insulation remains dry during its serviceable life

Autex Greenstuf must be installed in accordance with the relevant requirements of NZS 4246, the Technical Literature and Appraisal No.380 (2008), to meet the stated thermal performance rating of the insulation.

Statement of Building Code Compliance

In the opinion of BRANZ, Autex Greenstuf if designed, used, installed and maintained in accordance with the statements and conditions of Appraisal No. 380 (2008), will meet or contribute to meeting the following provisions of the New Zealand Building Code:

  • Clause B2 DURABILITY: Performance B2.3.1(a), not less than 50 years, and B2.3.1(b) 15 years. Autex Greenstuf will meet this requirement
  • Clause E3 INTERNAL MOISTURE: Performance E3.3.1. Autex Greenstuf will contribute to meeting this requirement
  • Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1. Autex Greenstuf will not present a health hazard to people
  • Clause H1 ENERGY EFFICIENCY: Performance H1.3.1 (a), H1.3.2 (E). Autex Greenstuf will contribute to meeting this requirement

Autex Greenstuf has been appraised as an Acceptable Solution in terms of New Zealand Building Code Compliance. Autex Greenstuf thermal resistance (R-Value) has been determined by AS/NZS 4859.1 which is an acceptable method.

B2 Durability compliant
Durability
C Protection from Fire compliant
Protection from Fire
E3 Internal Moisture compliant
Internal Moisture
F2 Hazardous Building Materials compliant
Hazardous Building Materials
H1 Energy Efficiency compliant
Energy Efficiency
BRANZ Appraised
BRANZ Appraised
Interior Fire Rating 1S
1S
Documents
All Technical Documents
All Technical Documents
Product Page

Autex is an innovative manufacturer of polyester products and has developed a diverse range of insulation and acoustic products.

Product Enquiries

News from Autex

Sustainable Product Design for Better Built Environments
Autex H1 Calculations: Expert Assistance with Insulation Specification
Acoustic Solutions for Multi-Storey Residential Buildings
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.