• Suitable for pergolas, patios, verandas, carports and similar outdoor living structures
• Suitable for residential and light commercial applications where natural light transmission is desired
• Suitable for installation throughout New Zealand subject to project specific design requirements
• Suitable for installation on timber framing designed in accordance with NZS 3604 or specific engineering design
• Suitable for roof pitches of 5° or greater
• Suitable for open sided structures where full weathertightness is not required

• Not intended for enclosed habitable buildings requiring a fully weathertight roofing system
• Installation must be carried out in accordance with Alsynite One installation requirements
• Supporting structure must be designed for the applicable wind and loading conditions
• Roof access should be limited to maintenance activities using appropriate access equipment
• Do not walk directly on sheets
• Fixings must allow for thermal expansion and contraction of the polycarbonate sheeting

When designed, specified and installed in accordance with Alsynite One technical literature, LASERGLAZE may contribute to compliance with the following New Zealand Building Code clauses:

• B1 Structure
• B2 Durability
• F2 Hazardous Building Materials

Product suitability for individual projects, including structural adequacy and weather performance, remains the responsibility of the designer, installer and building owner.

LASERGLAZE is the current generation of the established Custom Glaze profiled polycarbonate roofing system. Profiled polycarbonate roofing systems of this type have been widely used throughout New Zealand for pergolas, patios, verandas, carports and outdoor living structures for many years.

• High natural light transmission
• UV stabilised polycarbonate construction
• Lightweight roofing system
• Glass look architectural appearance
• Corrosion resistant polycarbonate material
• Accommodates thermal movement through oversized fixing holes and EPDM washer fixing system
• Compatible with matching polycarbonate and metal flashing options