Resene Armourchlor HB-P by Resene

Resene Armourchlor HB-P

Description

Resene Armourchlor HB-P is a vinyl based anti-corrosive primer for direct application to suitably prepared steel or an intermediate coat over zinc rich primers or galvanising. The coating has a very high degree of impermeability and although blast cleaning must always remain the preferred method of surface preparation it will give superior performance over power or hand cleaned steel.

Key Features

Colour: Blue
May be applied over a wide range of temperatures -20º C to +50º C
Excellent inter-coat adhesion both initially and long-term
Fast drying
Intermediate coat over galvanising or zinc rich primers, such as Resene Zincilate 10/11 (see Data Sheet RA20/RA21) or Resene ArmourZinc 110 (see Data Sheet RA23).

Scope of Use

Bridges
Chemical plants
Cranes
Galvanised iron
General structural steelwork
Marine structures
Roofs
Ships
Tank farms
Towers

Limitations on Use

Solvent resistance
Not resistant to vegetable oils or animal fats
Will soften at temperatures above 50ºC
Heavy film thicknesses require extended drying prior to overcoating with alkyds, acrylics or Resene Polymeric AV-8 (see Data Sheet RA63)
Overcoat with acrylics, alkyds, chlorinated rubbers and vinyls (light topcoat colours to be used irrespective of topcoat type)
Not recommended for total immersion service