DOWSIL 896 PanelFix Silicone Sealant by Glasscorp Architectural

DOWSIL 896 PanelFix Silicone Sealant

Glasscorp Architectural

All products

Product Enquiries

Description

Dowsil 896 PanelFix is an elastic one-part neutral curing silicone sealant specifically designed for panel bonding applications that require high durability and fast handling. It provides immediate strength directly after application.

DOWSIL 896 PanelFix is a silicone which shows primerless adhesion to a variety of substrates such as anodised and mill finish aluminium, and mineral substrates and provides high strength once fully cured. DOWSIL 896 PanelFix is not suitable for structural glazing applications.

Available in black and white.

Key Features

Instant Green Strength directly after application
High strength silicone sealant
One-part moisture curing
Low squeeze-out
UV- and weather-resistant
Primerless adhesion to a wide range of substrates
Neutral cure
Low odour
Elastic bonding silicone
No creep under high temperature
Temperature stability up to 150°C
Fast and easy panel bonding
Safe assembly due to fast strength build up
High longevity
Factory bonding and on-site application
Compatible and approved package: silicone and tape
CE marked according to EN 12004

Scope of Use

Factory bonding – In the factory, Dowsil 896 PanelFix is used to bond hooks onto the panel, which is then connected on-site to the subframe. With its extensive movement capability, Dowsil 896 PanelFix can be used with virtually any size of panel, and its high instant green strength eliminates the need for tape
Classic on-site bonding – DOWSIL 896 PanelFix and DOWSIL PanelFix Tape enable direct application of facade panels to the subframe on-site
Product can be used with PanelFix tape DC896T

Limitations on Use

DOWSIL 896 PanelFix is not suitable for structural glazing applications
Available on request
Must be used in accordance with technical literature and maintenance guidelines
For more information on compatibility with other products and specialist advice, please contact Glasscorp Architectural directly
Customers should independently determine the suitability of this product for their specific purpose prior to use

Statement of Building Code Compliance

DOWSIL™ sealants may contribute to compliance with the following code clauses when correctly applied.

B2 (Durability), B2.3.1(a). The durability of silicone is well established in NZ based on in-service use.
C2 – C6 (Protection from Fire), applicable performance criteria. Performance based on fire testing.
E2 (External Moisture) & E3 (Internal Moisture), applicable performance criteria. Silicone when applied seals joints and allowed to cure will resist water penetration.
F2 (Hazardous Building Materials), F2.3.1. Silicone is not considered hazardous, and does not emit harmful gases.