You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Promat Promatect 100 Board
Description

Promatect 100 comprises autoclaved calcium silicate spheres* bound in a mineral matrix. PromaX technology provides excellent fire performance in most applications.

Off-white in colour, one face is smooth and ready to form a finished surface, able to receive almost any form of architectural/finish treatment. The reverse face is sanded.

Promatect 100 is resistant to the effects of moisture and will not physically deteriorate when used in damp or humid conditions. Performance characteristics are not degraded by age or moisture, however, it is not designed for use in areas subject to continual damp or high temperatures. Promatect 100 is for internal applications only.

*Promaxon is a synthetic hydrated calcium silicate in spherical form.

Key Features
  • Comprises autoclaved calcium silicate spheres bound in a mineral matrix
  • One smooth face, ready to form a finished surface
  • Resistant to moisture; will not physically deteriorate when used in damp or humid conditions
  • Performance is not degraded by age
  • Not designed for areas subject to continual damp or high temperatures
Categories
Fire Safety
Ranges
Passive Fire
Scope of Use

Promatect 100 is for internal applications only

Applications:

  • For ceiling and wall  protection
  • Steel/timber stud partitions, solid/frameless partitions
  • Self-supporting ceilings
  • Timber floor protection, mezzanine floor
  • Access hatches, fire doors

Promatect 100 for 2hr protection on walls

Single layer system either side of steel or timber stud for -/120/120 or 120/120/120.

  • Wall heights up to 7800mm using standard steel studs (For wall height higher than 7800mm please contact Forman)
  • Reduced installation costs
  • Thinnest footprint 104mm (cf GIB 128mm)
  • The surface of the board allows it to be taped and set and used as a finished product
  • Steel or timber studs at 600mm centres (same as GIB)
  • System can achieve acoustic ratings

4hr walls (-/240/240) can also be achieved using Promatect 100/20mm — Two layers either side of stud work.

Promatect 100 for 2hr protection on ceilings

Promatect 100/20mm can be used to protect fire from below and fire attack from both directions 

  • Large spans available (up to 10m)
  • Fire attack from above and below requires a single layer of 20mm either side of stud work (same system in GIB requires 5 layers of GIB board 3 on bottom, 2 on top)
  • Reduced installation costs
  • Steel or timber studs at 600mm centres (same as GIB)
  • System can achieve acoustic ratings

4hr ceiling (-/240/240) can also be achieved using Promatect 100/20mm.  Two layers either side of stud work.

Limitations on Use
  • Not designed for areas subject to continual damp or high temperatures
  • Not for exterior use
Other Performance Attributes
  • Resistant to moisture; will not physically deteriorate when used in damp or humid conditions
  • Performance is not degraded by age
Documents
Data Sheet

New Zealand's largest marketer and distributor of ceilings and interior wall systems, thermal and acoustic insulation, and passive fire protection products.

Product Enquiries

News from Forman Building Systems

Introducing Viroc Cement Bonded Particle Board NEW
Forman Provides Unique Ceiling for Co-Working Space
Forman Adds Flair to Collaborative Workspace
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.