• Dulux Design Metallic Effect is suitable for use on interior feature walls 
• Also suitable for use on doors, trim or furniture
• Recommended for interior use only
• Resists temperatures up to 60°C
• Suitable for use in wet areas after 48 hours dry time
• Can be applied to paper faced plasterboard, bare timber, cement, brick, bare set plaster, fibrous plaster and plasterglass

• All preparation and painting must conform to AS/NSZ 2311: The Painting of Buildings
• Not suitable for high wear situations or surfaces with varying porosity
• The temperature must be between 10°C and 30°C during application, and remain above 10°C during drying. Under cool or humid conditions, allow longer times to dry
• Avoid wiping or cleaning new painted surface for a minimum of one week after painting
• In high traffic or high wear situations, apply one coat of a water based clear, such as Berger Jet Dry Stone & Paving Sealer in Natural diluted with water at a 1:1 ratio, to protect the finish

• Recommended for interior use only
• Resists temperatures up to 60°C
• Suitable for use in wet areas after 48 hours dry time
• Sensitive to hydrocarbons and alcohols
• Abrasion Care should be taken to avoid marring or burnishing

Maintenance and care

• Avoid wiping or cleaning new painted surface for a minimum of one week after painting
• In high traffic or high wear situations, apply one coat of a water based clear, such as Berger Jet Dry Stone & Paving Sealer in Natural diluted with water at a 1:1 ratio, to protect the finish