You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Dimondek 300
Description

Dimondek 300 is a smaller scale, concealed fixed companion to Dimondek 400 and is especially suitable for commercial applications where fine detail and design proportions are an integral component of the architectural brief.  Dimondek 300 can be used at a low pitch like all Dimondek profiles and the stiffened ribs provide structural strength and weather tightness as well as the ability to be secured in place without the need for fixings to penetrate the sheet.

Key Features
  • Concealed Clip System
Green Tag Certified
Green Tag Certified
Scope of Use
  • Cover: 305mm 
  • Sheet Width: 310mm
  • Minimum Pitch 3° (approx 1:20)
  • All roofing spans are shown as maximum spans to suit occasional foot traffic only
Limitations on Use

Not suitable for use as a platform for maintenance work.

3° Minimum Roof Pitch Required
Statement of Building Code Compliance

Test information available from Pacific Coilcoaters and BHP NZ Steel, and past history of use of long run metal roofing and cladding products in New Zealand indicate that, provided the product use and maintenance is in line with the guidelines contained in the current literature referenced, Dimond long run metal roofing & wall cladding systems can be expected to meet the performance criteria in clause B2 and E2 of the New Zealand Building Code, for a period of not less than 15 years.

In-Service History

Dimond is New Zealand's largest manufacturer of steel roofing, cladding, structural and rainwater goods.

Other Performance Attributes

Green Tag:

  • All Dimond Roofing products roll-formed using ColorCote painted steel coil is Global GreenRate GreenTag certified and is applicable for Green Star and Home Star credits

Span Capacity

Roofing Span Capacity
Thickness End span Internal span
0.55mm 1.30m* 2.00m*

*To suit ultimate wind loads up to 1.5 kPa

Cladding Span Capacity
Thickness End span Internal span
0.55mm 1.20m* 1.90m*

*To suit ultimate wind loads up to 2 kPa

Note: Spans shown above are for steel. When using other materials please call 0800 DIMOND for more info.

B2 Durability compliant
Durability
E2 External Moisture compliant
External Moisture
Documents
CAD/PDF LInk
Product Technical Statement
Dimond Roofing & Cladding Technical Manual
Span Tables
Environmental Information
Environmental Information
Specification Clause (Masterspec)
Installation and Operation
Dimond Homeowners Brochure
Colour Range
Additional Information

Dimond Roofing are a manufacturer of steel roofing, cladding and rainwater products.

Product Enquiries

News from Dimond Roofing

Creating a Statement with Curves Featuring Eurotray Roll Cap
Vented Wall Cladding Cavities with Dimond's Vented Non-Combustible Batten NEW
Warm Roof and Moisture Management for Rangiora West Primary School
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.