You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Eurotray Double Standing Seam

Eurotray Double Standing Seam is typically specified and formed using higher end materials like copper, zinc and aluminium. Double Standing can be found in a number of architecturally noteworthy designs. Double Standing Seam can also be concave curved giving extra flexibility to the building design.

Key Features
  • Concealed clip
  • Can be run on site
  • Photovoltaic laminates (PVLs) can be installed on to this profile
  • Can be machine curved, radius is dependant on the material being used
  • Suitable for roof and wall cladding
  • NZMRM air box tested
Green Tag Certified
Green Tag Certified
Scope of Use
  • Cover Width: 526mm AKL, 520mm CHC, 525mm INV
  • Sheet width: 523mm AKL, 517mm CHC, 523mm INV
  • Minimum pitch: 3°
  • Photovoltaic laminates (PVLs) can be installed on to this profile
  • Suitable for roof and wall cladding
  • Can be run on site
  • Can be machine curved, radius is dependant on the material being used
Limitations on Use
  • Eurotray requires a fully supported substrate underneath it
  • Suitable for most locations and venting of skillion ceiling roof designs is highly important. Dimond Roofing also recommends that a vented type underlay is used with these designs
  • Oil-canning, flatness or waviness is a condition that may occur when using wide pan profiles
  • Installed exclusively by RoofingSmiths installers
3° Minimum Roof Pitch Required
Statement of Building Code Compliance

Test information available from Pacific Coilcoaters and BHP NZ Steel, and past history of use of long run metal roofing and cladding products in New Zealand indicate that, provided the product use and maintenance is in line with the guidelines contained in the current literature referenced (see Dimond Roofing website) Dimond long run metal roofing and wall cladding systems can be expected to meet the performance criteria in clause B2 and E2 of the New Zealand Building Code, for a period of not less than 15 years.

In-Service History

Dimond is New Zealand's largest manufacturer of steel roofing, cladding, structural and rainwater goods.

Other Performance Attributes
  • NZMRM air box tested

Green Tag:

  • All Dimond Roofing products roll-formed using ColorCote painted steel coil is Global GreenRate GreenTag certified and is applicable for Green Star and Home Star credits
B2 Durability compliant
E2 External Moisture compliant
External Moisture
Data Sheet
Dimond Roofing & Cladding Technical Manual
Product Technical Statement
Environmental Information
Environmental Information - Global Green Tag
Installation and Operation
Colour Range
Additional Information

Dimond Roofing are a manufacturer of steel roofing, cladding and rainwater products.

Product Enquiries

News from Dimond Roofing

Transforming Commercial Spaces: Dimond Roofing's BB900 Wall Cladding Profile at Winstone Wallboards' GIB Factory
The Dagg's House: Family Living Meets Coastal Elegance with Dimond Roofing's Heritage Tray
Dimond Roofing Partners with The Current Place for Woolshed Restoration
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.