• Suitable for both roof cladding and wall cladding applications
• COLORSTEEL BOUNCE pre-painted steel products are designed for use in moderate or severe environments
• Suitable for roll-formed roofing applications

COLORSTEEL BOUNCE products are not recommended for the following applications:

• Intensive animal shelters, where the build-up of alkaline fumes may occur
• Swimming Pools, and other structures with continually wet internal environments
• Buildings with harsh internal environments such as galvanising plants, tanneries and meat works
• Fertiliser works
• Embedded in concrete
• In contact with soil, bark or similar
• Geothermal areas
• As rainwater goods
• As roofing fascia

Before using COLORSTEEL BOUNCE products in these environments please consult one of COLORSTEEL's Business Development Managers for a recommendation. 

Copper or brass pipes must not be allowed to discharge onto COLORSTEEL pre-painted steel products or be allowed to come into contact with them. The use of other materials in proximity to COLORSTEEL BOUNCE must be carefully considered — the COLORSTEEL Incompatible Materials bulletin should be used as reference.

Mixing of brands of pre-painted material on the same building is not recommended.

COLORSTEEL BOUNCE is certified as a Type 4 type coating when tested to AS/NZS 2728 and therefore complies with the building Code as a roofing and wall cladding material when used in accordance with Table 20 of E2/AS1.

COLORSTEEL BOUNCE is manufactured by New Zealand Steel Limited. All COLORSTEEL products are made, tested and trusted for New Zealand conditions.

Appearance:

• Colour retention (CIE Lab units Delta E) is 8 units maximum after 10 years exposure, and 10 units maximum after 15 years exposure. Chalk rating (AS 1580:481.1.11:1998) is no more than 4 after 10 years exposure
• COLORSTEEL BOUNCE is a product optimised for solar reflectance and is available in a bright white colour only. The backer coat is Perpetual Grey
• Coolhaven white — TSR:77%, LRV:85%

Standards:

• Steel substrate may be either G300 or G550 consistent with AS 1397:2011
• Metallic coating is AZ 150 consistent with AS 1397:2011
• COLORSTEEL Bounce is Product Type 4 consistent with AS/NZS 2728:2013
• Tolerances are consistent with the requirements of AS/NZS 1365:1996

Fire Resistance:

• COLORSTEEL Bounce is rated as a Group 1-S material and has an average specific extinction area of 132.2 m²/kg, a peak heat release rate of 16.0 kW/m² and total heat released of 0.54 MJ/m² when tested in accordance with ISO 5660:2002 Part 1 and Part 2

Drinking Water:

• COLORSTEEL Bounce samples tested in accordance with AS/NZS 4020:2005 passed the requirements for products in contact with drinking water