Juralco's Infinity Frameless Glass Balustrade System is part of the Edgetec heavyweight glass balustrade range. Edgetec Infinity is a cantilevered, balustrade system that utilises proprietary clamps for installation of either 12mm or 15mm thick toughened glass panels, with an interlinking top rail. For a fully frameless finish, without an interlinking top rail, SentryGlas (a laminated, toughened glass with inlayers) can be specified for face fix Infinity balustrade.
Fully enclosed linear frameless glass balustrade system
Top or face fix installation
Fixings hidden behind matching cover plate
Interlinking top rail finished in same powder coat as fixings
Easy to install and adjust, even if the deck moves after installation
Choice of either 12 or 15mm toughened safety glass infill
SentryGlas in 13.52 or 17.52mm available for face fix installation without an interlinking top rail
No holes required in glass
Designed and assembled in New Zealand
Wide range of custom powder coat colours for finish
Complies with NZS1170, NZS4223.3.2016, NZBC Clause F9 & 162C of the Building Act (pool safety legislation)
Edgetec Infinity Balustrade is suitable for use on timber, concrete or steel and can be finished in a range of Dulux powder coat colours.
Limitations on Use
The Edgetec Infinity Balustrade must only be installed in accordance with the Edgetec Infinity product manual
Glass must have a minimum strength of 100mpa
All glass edges must be polished
All frameless balustrade must have top interlinking rail (as of June 1 2016)
Any deviation from standard fabrication or installation must be accompanied by a site specific PS1, with site specific calculations and drawings. Juralco can help with arranging site specific — talk to Juralco for details.
Very High Wind Zone
Statement of Building Code Compliance
Designed and manufactured in New Zealand, the Edgetec Infinity balustrade system has been engineered and tested by independent engineers to comply with NZ standards AS/NZS1170 and NZS4223.3.2016, New Zealand Building Code B1, B2 and F4, NZBC Clause F9 & 162C of the Building Act (pool safety legislation).
Edgetec Infinity balustrade is suitable for Occupancy A, B, E C3 Residential and C3 Commercial.
Residential balustrade installations up to 1200mm high, using 12mm thick glass, are achieved with 500mm clamp centres and Commercial B, E and C3 applications up to 1300mm high, 15mm thick glass requires 400mm clamp centres.
Any deviation from standard fabrication or installation must be accompanied by a site specific PS1, with site specific calculations and drawings.
An interlinking top rail has been incorporated into the Edgetec range to comply with new 2016 balustrade regulations - NZS4223.3.2016.
Juralco has over 18 years experience designing and installing balustrades throughout NZ and continues to focus on supporting and developing its dealer network.
The Edgetec Infinity Balustrade range was introduced in 2014 in response to demand for high quality and modern frameless glass balustrade systems. The Edgetec range uses heavyweight glass with a choice of fixing systems, including round disc (Double Disc Anchor), strut posts (Mini Post), rectangular clamps (JH Clamp), or a cantilevered face or top fix balustrade (Infinity).
Other Performance Attributes
All infill glass must be toughened safety glass, complying with AS/NZS 2208.
Dulux Duralloy powder coating is used for properties greater than 100 metres from high tide level, where AMA 2603 performance is required.
Dulux Duratec powder coating must be used for properties greater than 10 metres and up to 100 metres from high tide level where AMA 2604 performance is required.