You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Profix TS10
Description

Profix TS10 Concealed fixed weatherboard facade system, is a unique concealed fixed aluminium rail system that ventilates and drains at each horizontal lap. Specifically designed for use with Trespa Meteon panels are creatively machined in length to form horizontal weatherboards that can be varied in width and length to suit many configurations and colour options creating a traditional or ultra-modern look to your cladding system.

TS10 rails are fixed independently to a 35mm cavity system that enables the façade to be fixed without penetrating the air seal or farming. All weatherboards are grooved on edge to enable easy clip fixing into the TS10 rail. Panels are ship-lapped at vertical joints to effectively weatherproof the joint whilst allowing for movement between panels.

TS10 is further enhanced with full range of anodised flashing components for windows and internal and external corners.

TS10 is compliant and tested to meet the requirements of AS/NZS 4284, NZBC E2/AS1/VM1 and B2 respectively.

  • Available in 4 master sheet sizes
  • Available in 8 and 10mm thickness
  • Available in a large range of colours and finishes
Key Features
  • Profix TS10 rail system is durable, lightweight and can span between fixings
  • Profix TS10 rails provide easy fit concealed fixing and are available in both anodised or powder coated options
  • Profix TS10 rails are fixed to a 35mm timber cavity batten which can be increased to 45mm to allow for straightening of existing substructures outside the air seal
  • Profix TS10 offers minimal maintenance and exceptional through life performance
  • Profix TS10 is suitable for use as a cladding solution on new buildings and facade upgrades
  • Profix TS10 supply and installation is carried out by approved installers only
Categories / Ranges
Proprietary Cladding Systems
Scope of Use
  • Suitable for use as a residential or commercial cladding façade up to 4 levels
  • Fixed over a Rigid Air Barrier compliant with NZBC E2/ AS1/Table 23: 1 August 2011 and NZS 3604:2011
  • Approved for use in wind zones up to 2.5 kPa ULS wind pressure or 64.5 m/s with reference to AS/NZS 4284
  • For use in wind zones exceeding 2.5kPa wind pressure the system and fixings must be specified as site specific by the system suppliers
  • Suitable for use in all environments including sea spray and geothermal zones
  • Suitable for use with 10mm Trespa Meteon in panel widths from 150mm – 750mm wide and lengths up to 3.630m
Limitations on Use
  • Supply and installation is carried out by approved installers only
Statement of Building Code Compliance

Trespa Meteon panels in conjunction with Profix TS10 Cladding system meet the requirements of NZBC sections B1 Structure, B2 Durability and E2 External Moisture. 

In-Service History

Trespa Meteon panels have been used extensively in Europe for over 50 years and in New Zealand for over 10

Other Performance Attributes

Trespa Meteon panels are:

  • Colourfast
  • Extremely durable
  • High impact resistance
  • Low maintenance
  • Graffiti resistant
Documents
Product Technical Statement
Environmental Information
Environmental Information
Environmental Information
Environmental Information
Environmental Information
Additional Information

Supplied by Decortech, Trespa Meteon is a durable, colour-fast, impact resistant High Pressure Laminate (HPL).

Product Enquiries

News from Trespa Meteon

Nature is at the Core of Trespa Cladding
Create Show-Stopping Exteriors with Trespa Meteon
Trespa Meteon Launches New Focus Range and Lumen Colours NEW
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.