Muros Roughcast Concrete Style Panels by Muros

Muros Roughcast Concrete Style Panels

Muros

All products

Roughcast Concrete: Grey — Retail

Roughcast Concrete: Aged — Hotels

Roughcast Concrete: Black — Hospitality

Roughcast Concrete: Grey — Workspace

Roughcast Concrete: Grey — Residential

Roughcast Concrete: Grey — External

Roughcast Concrete: Grey — Retail

Roughcast Concrete: Grey — Workspace

Roughcast Concrete: Grey — Retail

Roughcast Concrete: Grey — Workspace

Commercial external charcoal roughcast concrete

Roughcast Concrete: Black — External

Roughcast Concrete: Grey — Close up

Product Enquiries

Description

Muros faux Roughcast Concrete Panels are constructed from a durable fibreglass-base, to authentically recreate the look and feel of raw industrial-style concrete without the weight or expense. The European panels are suitable for walls and ceilings, counters and columns. Designed for interior use, and exterior applications in residential and inspired workspace, hospitality and retail settings.

The artisan-made Roughcast Concrete panel provides a contemporary weathered concrete form-work finish. The veneer shuttered relief replicates the real imperfections of a poured form-work concrete wall; complete with cracks, timber form lines, patches, air-pockets and stony aggregate seams.

Constructed from a fibreglass compound, combined with natural mineral pigments, panels are available in a range of colours, and also easily painted. Plaster, sign writing and other creative finishes offer further versatility and distinction.

Format:
- Horizontal: 3,280 x 1,310mm (w x h)
- Vertical: 1,310 x 3,280mm (w x h)
Depth: variable from 4–18mm (throughout the panel)
Total area: 4.30m²
Weight: 33kg
Please note: Panel dimensions can vary slightly between handmade batches

Key Features

Lightweight, flexible, and cost effective
Strong and durable — impact, water, erosion, UV and thermal resistant
Space saving with low relief
Straight-forward installation, and maintenance free
Available in both vertical and horizontal formats
Available in four colours (grey, aged, black, rust) and can be painted
Interior and exterior walls and ceilings, columns and counters
Group 3 fire rating (Group 1 available on request)
Non-structural — not requiring consent

Categories / Ranges

Exterior Decorative Items Composite Wall Linings Panel Surfacing to Walls and Soffits Concrete

Scope of Use

Panels are used for a wide range of building applications, primarily: walls, ceilings, columns, counters, bulkheads, and external facades
Suitable for interior application. Exterior use requires specific installation advice and materials
Ideally installed over a solid substrate such as ply or MDF to accommodate mechanical fixing.
Existing plasterboard/GIB can also be used with fixing focused on the wall framing behind — see Installation Instructions for full information

Limitations on Use

Muros Wall Panels provide a strong and durable decorative finish — they are not cladding
Exterior use is subject to specific installation advice — contact Muros
Muros Wall Panels are fire resistant (Group 3 and Group 1 available), however to maintain a quality appearance panels should not be subjected to strong, direct, or constant heat
Exposure to weather elements, and coastal locations with salt may impact the finish quality over time — contact Muros for full information
Acoustic features are not inherent in the wall panels
Not designed as an insulating product
Not recommended for use in showers

Statement of Building Code Compliance

When used in accordance with the instructions and information from Muros, Muros Wall Panels will meet the following requirements of the New Zealand Building Code (NZBC):

B1.3.1, B1.3.2 and B1.3.3 (a) and (j): Muros Wall Panels meet the requirements for loads arising from self-weight and typical soft body impacts normally expected in areas where the product will be used
B2.3.1 (c): Muros Wall Panels meet the durability requirements of the NZBC and have a serviceable life of at least 5 years

Muros Wall Panels have been tested to Australasian fire rating standards: ISO 5660 (NZ) and AS/NZS 3837 (Australia).

Muros Wall Panels have a Group 3 Number Classification rating as tested and reported by BRANZ
Group 1 available on request

In-Service History

Muros Wall Panels have been successfully installed and used internationally for over 25 years. Muros' solid reputation over the past decade in the Australasia Pacific region, has been built on end-to-end personalised customer service, reliability of supply, quality of product, fulfilment of orders, and after-sales support.