You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Fireshield SQ476
Description

Fireshield SQ476 is a white single pack solvent intumescent used to fire rate internal structural steel for up to 60 minutes.

Key Features
  • Quality finish single pack solvent intumescent for interior use
  • Pigmented white
  • Interior or C1 use sequence of required coatings:
    • 1. Fireshield Approved primer coat
    • 2. Fireshield SQ476
  • When used in internal C1 areas where constant air humidity is over 75%, when a washable surface is required or in an internal C2 and C3 zone, sequence of required coatings:
    • 1. Fireshield approved primer coat (suitable for Corrosion Zone)
    • 2. Fireshield SQ476
    • 3. Fireshield approved top coat 
Scope of Use
  • The product must be applied in strict accordance with the Fireshield Application Instructions
  • Any steel surface that is to be coated is at a temperature above +5°C and below +35°C: and is at least 3° above the dew point
  • The surface to be coated must be completely clean and dry, remove all rust, dust, oil, grease, loose material or other contaminants
  • Check compatibility with any previous applied product before application

Interior or C1 use sequence of required coatings:

  • 1. Fireshield Approved primer coat
  • 2. Fireshield SQ476

When used in internal C1 areas where constant air humidity is over 75%, when a washable surface is required or in an internal C2 and C3 zone, sequence of required coatings:

  • 1. Fireshield approved primer coat (suitable for Corrosion Zone)
  • 2. Fireshield SQ476
  • 3. Fireshield approved top coat 

Application:

  • Airless spray gives the best result.
  • Brush and Brush applications are only suitable for small areas or touch-up and may result in a textured finish
Limitations on Use
  • Do not use on exterior steel structure
  • For C1 internal use without an approved top coat
  • Must be top coated in internal C2 and C3 zones and when the relative humidity is constantly over 85%
  • During application and curing day or night ensure that the air temperature must be between +5°C minimum to a maximum +35°C. The relative air humidity level is below 85%
  • Protect from wetting/moisture/windblown rain and do not let water pool on or around the coated steel section during application and curing 
Statement of Building Code Compliance

Tested to BS476 parts 21 : 1987 as per NZS3404:Part 1, 1997 and complying with the New Zealand Building Code B1/VM1 and C2/AS1-C6/AS1 Section C5.1.1.

B1 Structure compliant
Structure
C Protection from Fire compliant
Protection from Fire
Documents
Data Sheet: Fireshield SQ476

04-12-2019

Safety Data Sheet: Fireshield SQ476

01-05-2019

Approved Primers and Topcoats

10-03-2020

Dulux is a paint manufacturer and marketer of products that protect, maintain and enhance the spaces and places in which we live and work.

Product Enquiries

News from Dulux

Dulux Opens New Store in Kāpiti
Dulux Colour Awards Entries Now Open
Dulux Partners with Fireshield to Supply Intumescent Coatings

Posts by Heather Goode

See All

Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.