You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
The Cemintel Territory cavity walling system combines a pre-finished cement-based panel with a simple installation system that can be used externally or internally for residential and commercial buildings.
The Steppe panel features a patterned profile and is available in 3 finishes inspired by the sepia tones of the dry, grassy plains:
Territory panels are tongue and groove profiled along longest edges, and fit together to form a waterproof joint. The panels are secured with the panel clip, which is installed over a wall underlay or rigid air barrier. The system is installed over either timber frames, steel frames or masonry structure.
Cemintel panels are designed for use externally or internally for residential and commercial buildings.
The Cemintel Territory wall cladding system has been assessed by CodeMark for use as an external wall cladding system on buildings:
See CodeMark Certificate for full information.
The Cemintel Territory wall cladding system if designed, used, installed and maintained in accordance with the scope of the CodeMark Certificate and either the Cemintel New Zealand Design & Installation Guide — Territory Series External Horizontal Installation (FCNZ503 March 2019) or Cemintel New Zealand Design & Installation Guide — Territory Series External Vertical Installation (FCNZ523 March 2019) as applicable for the direction of installation (collectively referenced as 'Cemintel New Zealand Design & Installation Guide – Territory Series') will meet the following provisions of the NZBC:
The manufacturer, Nichiha Corporation, has been producing the Territory Cladding (previously known as Designer Series, and also known as EX Series in some countries) since 1990.
The product is used significantly in Japan, as well as being exported to USA, Canada, China, Korea, Russia, parts of Europe and Australasia.
The product has been supplied in Australia since 2012 by CSR Cemintel. Cemintel is a business unit of CSR Building products, who is one of the two parent companies of NZ Brick Distributors.
NZ Brick Distributors Partnership Limited warrants its Cemintel Territory Panels to remain free of defects in material and manufacture and that the coating will now blister, peel or flake for a period of 15 years from date of purchase. See Warranty document for full information.
The durability of the Cemintel Territory range can be enhance by periodic inspection and maintenance. Inspections should include examination of the coatings, flashings and seals. See Inspection, Repair and Maintenance document for full information.
Cemintel offers engineered cladding systems around pre-finished solutions that enhance performance and aesthetics.Product Enquiries