GreenStuf Thermal Roll Form by Autex

GreenStuf Thermal Roll Form

Autex

All products

Product Enquiries

Description

GreenStuf Roll Form is an insulation blanket suitable for thermal and acoustic insulation of commercial buildings. It can be used as a roof blanket, in ceilings, internal and external walls and in mid-floor cavities.

Key Features

Supplied as rolls manufactured to order and pre-cut to nominated widths
All eligible R-values of GreenStuf Roll Form are Environmental Choice New Zealand-certified
Local — proudly made in New Zealand
Durable — will not settle or reduce it's performance over time and is backed by a 50 Year Product Durability Warranty
Fire Safe — polyester insulation is non-flammable and meets all the relevant fire standards for NZBC compliance including downlights
High Performance — not affected by moisture, mould or mildew, and is naturally resistant to insect and vermin attack
Safe to touch — 100% polyester, completely safe and does not require protective clothing for handling or install
Recycled content — manufactured using a minimum of 45% recycled PET Plastics, and also recyclable at the end of its life

Ranges

Autex GreenStuf Insulation

Green Tag Certified

Post-Consumer Recyclable Content

Pre-Consumer Recycled Content

NZ Made

NZ-Owned Business

Red List Material Free

Scope of Use

Autex Greenstuf has been appraised as thermal and acoustic insulating material in walls, roofs and ceilings of buildings within the following scope:

framed or part-framed domestic and commercial buildings where the insulation remains dry during its serviceable life.

Autex Greenstuf must be installed in accordance with the relevant requirements of NZS 4246, the Technical Literature and Appraisal No.380 (2008), to meet the stated thermal performance rating of the insulation.

Statement of Building Code Compliance

In the opinion of BRANZ, Autex Greenstuf if designed, used, installed and maintained in accordance with the statements and conditions of Appraisal No. 380 (2008), will meet or contribute to meeting the following provisions of the New Zealand Building Code:

Clause B2 DURABILITY: Performance B2.3.1(a), not less than 50 years, and B2.3.1(b) 15 years. Autex Greenstuf will meet this requirement.
Clause E3 INTERNAL MOISTURE: Performance E3.3.1. Autex Greenstuf will contribute to meeting this requirement.
Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1. Autex Greenstuf will not present a health hazard to people.
Clause H1 ENERGY EFFICIENCY: Performance H1.3.1 (a), H1.3.2 (E). Autex Greenstuf will contribute to meeting this requirement.

Autex Greenstuf has been appraised as an Acceptable Solution in terms of New Zealand Building Code Compliance. Autex Greenstuf thermal resistance (R-Value) has been determined by AS/NZS 4859.1 which is an acceptable method.